Chapter 146: The first prototype (1/2)

Chapter 146: The first prototype

Translated by me, edited by drpetro

The autoe system!

A CNC machine had no way to finish sole drill bit

Generally, theoptions available to a machine, the more drill bits it had

Those drill bits that were of all shapes and sizes naturally needed to be kept in a specialized storage area When the need arose to exchange bits, the storage would rotate automatically, so that when the machine released its current bit, the bit would fall into an awaiting clahich would place it back into storage and the new bit would be inserted in and secured

The autoe systened worked on the same principle, as in the forefront of the ar system and hydraulic connectors

The Mechanical Colossus came with a built-in toolbox in the back, so when the need arose to change tools, it was as simple as turn, place, release, pick up, and secure

As for how to nimbly control the two mechanical arms, that was another technical problem

However, that problem could be easily solved, since there was no way the black tech ‘Artificial Mechanical Ar platform was the cockpit Inside of it were two support beam like control sticks The pilot could place their arms into the control sticks and, with the support of the arms movement system, the mechanical arms outside would be able to perfectly mimic the wanted movements of the pilot

This had already left the realns, and rather looked more like the cockpit of a Gundam

To prevent misuse, a controls button was installed inside, such that itoperations, otherwise no commands would be received by the pair of mechanical arms

This type of control system was just a Gundam without its armour and arn: the control systeular person probably couldn’t even last 10 minutes in the cockpit before they wouldn’t be able to even lift their ar would only tackle when the prototype was completed and tested

So, for now, only the peons were able to operate this machine effectively for any sustained period of time

The base was much simpler to construct, as all that was needed was to install and connect a readily available diesel powered generator with a geared trans into account the need to clined to be 4×4 and used the large double tires of those large wheel loaders

When the work platfor, with his laptop in hand, climbed into the cockpit of the prototype with much anticipation

This prototype cath of 10 meters

With the arms retracted, it just so happened to be level with the cockpit, so it was able to act as a temporary shi+eld for the pilot In addition, no matter how the arm was moved, there was no way for it to touch the cockpit because it was locked out by the control syste the cockpit

The inside was co as co cli wave of heat

“Need an AC unit!” Ye Qing called out as he jotted it down

The chair was currently just a piece of welded h-end electric tuned racing chairs