Chapter 339: Industrys Pursuit of Precision (1/2)

June 21, 2020

The fully mobile assembly platform built a hull and y device that subverted traditionaland a mechanical autoine Its full auto centers sha of an ionization purifier, which could gather the steps of a whole production line together and get rid of theh speed

This was true of ionizing purifiers, as arechairs

Now on the workbench, a horizontal guide rail that could be used as part of any high precision instrument in the world was drilled by a Master Craftscenter and on another workbench A Master Craftsrind a coin-sized rotating gear

The surface of this rotating gear had 120 tooth lines Each tiear wouldand ht error in the gear, the trans and the rotation of the bearing will cause a huge rotation error

Hand polishi+ng was not just about holding a file in a hand Like human-made watches, the most precise mechanical watches have always been made by these old Swiss craftsmen hite beards who polished and asse, only a few countries in the world could produce qualified products

Itknife represented one of the highest levels in the field of industrial processing As a sihness is acceptable

assurinding it sloith sandpaper However, if you look at it with a twenty-fold lass you will find that the surface of the material polished with sandpaper is uneven, which is more obvious than that of Mazi's face

If it fails under the 20x e to more detailed sandpaper and use 8000

However, the material removed by the 8000-mesh sandpaper does not show any defects if you look at it with the inal state under the optical microscope

At this tient, and use rind and cut

Then with the opticalain

Usepowder

So, the question is, can youpowder?