Chapter 398: Exhaustion (1/2)
Chapter 398: Exhaustion
After the students who Kobayashi+ led started up the five-axiscenter, he observed it with a steady victory Then ”Buzz~” the rotation of the drill bit driven by thefluid for cooling shouldn't be adjusted to the maximum without mercy and the students in the broadcast rooain
Time passed a little bit, after a er stay idle, so he hurried to the five-axis h the observationBecause after a full minute, the spindle hadn'tcenter, the best thing in it is the le This is easier to maintain its accuracy more than traditional machine tools to move processed materials But after onehappened The bit on the spindle hasn't cut the material
”Speed up to two thousand,” Kobayashi+ said quietly
”Hu the speed of rotation, the friction of the drill bit on the iron rulecenter, which pushed the students in the live broadcast roo up and couldn't help but sweat
The green smoke curled up slowly fro center Before he could get back to its senses, Kobayashi+ beat chicken blood the smoke quickly turned into black smoke
”The knife is burned~ The knife is burned~” The student of Shanghai University next to hie our equipy Co, Ltd stopped thecenter and the auto fluid used to cool theshed Fortunately, the circulating cutting fluid quickly cooled the drill bit The japanese students took off the drill bit, and their cheeks suddenly turned into a burning cloud
The top of the drill bit burned and rainbow-colored streaks appeared due to the high te that usually happened in the shop level processing factories actually happened to theh temperatures Under normal circu fluid and the cut wire, and the drill will not burn However, if the spindle feeds the tool and the , the friction will continue to rise As the speed increases, even the cutting fluid will not take away all the heat, and then the drill will burn
The iron ruler was also removed from the fixture, and everyone saw there was no trace on the back of the iron ruler, but it was not intact If they looked closely with a lass, they could still see the place where the drill processed before
The japanese students would have difficult feelings because if they wanted to engrave words even if they would have to burn a thousandheads they couldn't do
”This this is i the five-axis center shouted with protective gloves holding the iron ruler: ”Why can't we even a pit be drilled out?”
Kobayashi+ was still in front of the ca them the level of metal materials in our country Now the drill heads were burned by theirat the intact iron ruler, the audience in the live broadcast room quickly sprayed a sip of water on the screen
”Even if they can't ature Please allow me to sympathize with them for 01 seconds To be honest, they launched us intofroo to work at Monster Heavy Industry after graduation, which is too honorable”
”The one who is going to work at the Monster Heavy Industry, wake up quickly”
Kobayashi+ had decided to engrave the ithout a doubt So, half an hour later, after intense preparations froy the iron ruler was h arc cutting is suitable for high hardness alloys, its cutting has no precision at all Even if the feords can be cut out at the end, not toat the horizontal angle, the slightly ant level of visualization cannot be satisfactory
The dazzling blue arc raged on the back of the iron ruler The huge noise of the arc breaking through the air lashed the eardrums of nearby students It is a pity that the scene that occurred with the five-axish countless tracks, but the two-axistables below couldn't ain, and there was only an insignificant color change on the surface