Chapter 26 (2/2)

It would be a waste of materials to clean up the remaining raw liquid in the electric melting furnace after each smelting. These materials are not cheap, especially those rare materials. ”

After listening to the worker's words, Wang Bin was speechless. You know, even for ordinary glass, after production, the glass slag in the electric melting furnace also has a great impact on the next production of glass. Before, these workers did not need to clean the electric melting furnace when they were still producing glass crafts and producing a small amount of glass with Tiangong technology, After all, the quality requirements of glass crafts for glass are not so high. Even if there are some defects, they have nothing to do with elegance. Moreover, these defects can be treated in the processing of crafts.

But now it's different. They produce special high temperature resistant glass! In the production process, all procedures can not have any problems. If you are not careful, the whole furnace of glass stock solution will be scrapped, as it was this morning, and even affect the subsequent production.

Therefore, Wang Bin already knows that the problem this time does not appear in materials and equipment, but that the workers did not thoroughly clean the glass furnace before starting today.

Of course, the workers are also kind. They are afraid that there will be a waste of materials in the smelting process. In addition, when Wang Bin left yesterday, he did not explain clearly to the workers, which led to the smelting failure of this furnace of glass stock solution this morning.

So he said, ”well, I already know the reason. It's because the electric furnace didn't clean up completely before starting this morning, but it's also strange that I didn't explain it in advance.

In the future, we must remember the lesson of this time. Don't ignore the details because of saving materials. In the future, we must clean all the remaining slag in the electric melting furnace after smelting one furnace, and then carry out the smelting of the next furnace.

At the same time, don't be afraid to waste materials in production, especially when the first furnace is smelted every morning. After all, there is no way to produce special glass. Otherwise, this furnace of glass this morning is the best lesson.

Well, everyone is an old worker of Tiangong technology. I don't want to say anything more. Just be clear in your heart! Let's start! ”

After that, Wang Bin and the workers began to clean the electric furnace. Soon, the electric furnace was cleaned up with the joint efforts of everyone. Wang Bin allowed the workers to start putting raw materials into the electric furnace and starting the electric furnace.

When the workers began to put materials into the electric furnace, Wang Bin also stared at the situation in the furnace all the time, for fear of any accident in the smelting process or the appearance of the previous black thing again.

However, fortunately, during the smelting process of the cleaned electric furnace, there was no accident in the glass stock solution, and there was no wrong color in the red glass stock solution.

An hour later, today's second furnace of glass stock solution finally came out of the furnace, and then the workers poured it into the mold and pushed it into the cooling furnace for cooling. However, after pushing the mold into the cooling furnace this time, the workers did not immediately start smelting the glass stock solution, but first cleaned up all the remaining slag in the electric melting furnace, and then waited for the glass in the cooling furnace to cool down!

Soon the glass in the cooling furnace was cooled and pushed out of the cooling furnace. Wang Bin and the workers immediately came forward and looked carefully. The pieces of glass were intact and crystal clear. Even if they didn't look carefully, they couldn't see the existence of special glass in the mold.

Obviously, the glass produced this time is not the same as last time. Even in terms of quality, even the naked eye can see that it is better than yesterday, which makes Wang Bin relieved.

However, he still picked up a piece of glass and entered his laboratory to test the furnace of glass.

When the test was completed, Wang Bin's heart was finally put down. The glass from this furnace was unexpectedly good, and even almost comparable to that produced by Wang Bin's laboratory.