Chapter 148 (1/2)
”Yeah!!! We did it, we did it!!”
”Great! Unexpectedly, we really developed a small special copper alloy production line. It's great!”
When Wang Bin announced the structure of the trial production, Yu Pingping and them immediately cheered loudly.
Wang Bin did not stop them. Although this production line is only a small production line, as a special copper alloy production line, the technical content of the whole production line is not low. Most importantly, it is more difficult to use modern electronic equipment, so Yu Pingping et al, It is definitely not easy to develop this production line.
After a while, when Yu Pingping and others calmed down, Wang Bin said to them again: ”Yu Pingping, now that our production line has been tested successfully, the next step is to install the production line into the workshop and start formal mass production. In addition, since this production line is only a small production line and a production line with a very low degree of automation, your task is still very heavy.
First, in the later production process of the production line, especially in the initial stage, you must send someone to guide workers to operate the production line, and be responsible for improving some defects of the production line to make the production line more perfect.
At the same time, you have to design more advanced production lines, such as the degree of automation of the production line, improving the output of the production line, and so on. ”
After listening to Wang Bin's words, Yu Pingping and others nodded. Yu Pingping said, ”good president Wang! We have a specific plan. This afternoon, we will move this production line to plant 5. Although plant 5 is not very large, it is not a problem to put a few small production lines.
At the same time, we have set up a special team for the follow-up improvement and maintenance of the production line. Although we only design and manufacture such a production line now, with more and more products and production lines designed and produced in the future, we must have special personnel to be responsible.
Finally, we have a complete plan for the design of the new production line. Next, we are going to design a fully automatic production line with a daily production capacity of about 200 tons. If it is successful, we will carry out the design of medium and large production lines. ”
”Yes! But in terms of medium and large production lines, you don't have to hurry, step by step!” Wang Bin nodded with a smile.
In the afternoon, Wang Bin and Yu Pingping moved the production line to workshop 5 and completed the installation. At the same time, the production line began formal production the next morning.
Of course, Wang Bin has not announced the copper based superconducting materials produced on this production line, and naturally there are no customers. Wang Bin is not in a hurry to announce it. After all, the production capacity of this production line is only 80 tons. Coupled with the use of room temperature superconducting materials and the performance of this copper based room temperature superconducting material, Wang Bin is not afraid that there will be no customers in the future.
Therefore, Wang Bin is ready to store these copper based superconducting materials. After all, once Wang Bin establishes the production line of superconducting battery, the superconducting materials needed for superconducting battery alone will be very huge.
When Wang Bin saw that the installation and production of the production line designed by Yu Pingping and others were very smooth, even if there were some small problems, they were quickly solved by the professional team established by Yu Pingping and others. Wang Bin also paid attention to the mechanical R & D and design team of Yu Pingping and others, turned back to his own laboratory and continued the trial production of the second generation superconducting battery technology.