2058 Chapter 2058 Teaching Content (1/2)

To deal with a variety of problems, including dust, skeleton gnomes brought micromachines found on the ground into their cities..

They are very interested in this extremely tiny machine, so they formed a very large team to study micro-machines.

This 'giant' team has about a thousand skeleton gnomes participating. They hardly need to rest, so they continue to study until they understand the mysteries inside micromachines.

Micro-machinery is the same as other machines. There is a programmed system to drive the movement of the whole machine.

It's just that its system is relatively small, so understanding these things took a long time for the skeleton gnomes, but in the end, they finally understood the system inside.

They removed the original system of the micro-machine, and replaced the program they set, and then began to let the micro-machine serve them.

There were a lot of problems at first, but they slowly overcome these problems, and the control of micromachines is getting better and better.

However, they do not seem to use micro-machines everywhere. At present, the scope of their use of micro-machines is only to remove debris from the body.

The scope of use seems to be very narrow, but there have been no problems. In this record, it seems that this group of skeleton gnomes have not only had a difficult life at the beginning, but they also have a good life later.

Until ... now.

However, the current problems have not been recorded in these historical records. If they are completely wiped out, of course, there is no way to continue to record.

It seems that the history of this group of creatures is not very complicated, and they do not seem to record what happened before the arrival of fear energy.

But here, in addition to historical records, you can find many other things ...

For example, the map of the entire city of these skeleton gnomes, there are very detailed information, Lin now knows the specific situation of this city.

Most of this place is a place where civilians live, just like common cities, but now the situation in these cities does not seem to be ... optimistic.

Because you can see the surveillance images of most areas here, but now these images are all in a state of being unable to connect.

It may not necessarily be that all these areas have been attacked.

Lin felt that the possibility of attacking them was micro-machines. Micro-machines were considered to be unstable things. They had not been able to fully control these things.

But the truth of these attackers is not yet clear ... but it should be known soon.

Among the various materials that can be seen here, Lin saw many reports of errors in micromachines.

Generally, errors in the setting procedure cause the micro-machines to do some things they do not expect to do.

But there hasn't been much problem, but when Lin came here, she had studied the micro-machines here.

Because when passing through the passage, there are many in the passage ... Lin found that these micro-mechanical control systems are mainly divided into two parts.

One part is that they will perform tasks according to the set procedures, but there is another more priority part.

That is the part that receives the dream energy. There is a device in the micromachine that receives the dream energy ...

This means that they will receive a command from the dream, which is the energy of fear. This command will take precedence over other commands.

Fear energy can control these micromachines at any time, but now because there is no sense of fear energy here, it is still not certain ... whether the attacker is a micromachine.

In addition, here can also see the research data of the skeleton gnomes, here they describe how they learned various technologies in the skeleton machinery factory, and then how to control the micromechanics.

They are described here very carefully. They should expect their cubs to learn everything.

Their teaching method is to instill all the knowledge directly into the cub's brain. This is indeed very convenient, but it cannot be entered all at once, but it needs to be input little by little for a long time.

Lin can find some interesting things from these research materials, for example, about skeleton machinery.

It is mainly because they let the skeleton machinery factory start this part, which makes Lin care more.

When they first tried to start the factory, they also started a large number of skeleton machines, and the actual reason for starting these skeleton machines was not because they started the factory, but when they tried to start the factory, they triggered some kind of thing.

The skeleton dwarf felt that this kind of thing sent out instructions, started all the skeleton machines that were originally motionless in the factory, and let these machines excavate to the ground to start working.

And what exactly is this thing?

Lin is now looking for this thing. While Lin's pompom was observing data in the ”teaching area”, more pompons came to this underground city.

They acted separately, following underground passages to reach all parts of the city, and now several pompoms have reached other parts of the city.