3585 3585 DLCPM0016703000 SK (1/2)

It's not ... all the devices have no errors.

Although their fundamental goal ... that is, the ”manufacturing model” has not changed, but other aspects will occasionally change.

For example, about ... size adjustment.

All the models of the manufacturing device are generally around millimeters, as is the model of the model Shahai.

But this size adjustment is actually not fixed. The manufacturing device occasionally produces very large things, and at the same time adds another thing ... that is to make the manufacturing position wrong,

Therefore, it will appear in this 'third world'.

Its birth seems to be directly related to the whirlwind of the early Yuan Dynasty.

At the beginning of the Yuan Dynasty, the whirlwind began to send information to the void outside the channel, and the outside void also had many manufacturing devices that could receive information.

It is not known whether the manufacturing device went out first or the whirlwind sent messages in the beginning of the Yuan. In short, through its transmission, these devices in the void began to manufacture a large number of models.

The shapes of these models are different ... some are as small as gravel, and some are close to the original normal size.

And the third world is one of the places that is relatively close to normal size. Its origin is that the cyclone at the beginning of the Yuan sent the sand of the model sand ... The information of the third model sand was sent out and then received by the outside manufacturing device.

Then the manufacturing device assembled one by one ... the third world.

The specific manufacturing process is not yet clear. At that time, the manufacturing device did not seem to have ”evolved” the bus organs.

After creating the Third Realm, the manufacturing device seemed to cease activity and sleep for a while.

Then the created third world began to have creatures.

Lin thinks the reason for the above creatures is because the Third World itself is very 'perfect'.

That is to say, the manufacturing device not only produces terrain, but also puts up air or moisture.

But it is not clear ... how it was done that was not transmitted at the time, there may be some similar ways to use space.

They created the Third Realm and became inactive until the flying bricks dig them out and then move on again ... things are just like Lynn knew, the manufacturing device broke down the entire civilization of flying bricks and lost all the world air.

In this case, it is not only the flying brick civilization, but also the creatures on other continents.

For example, this place.

Lynn's pom-poms are now flying to a piece ... 'petal continent'.

Lin found that this place is actually similar to the space of the bones of many realms, each continent is separated.

This 'separation' is mainly related to the strange shape of the world. Between each continent there is a large 'pit' similar to the ocean as an interval.

And it was not the sea water but the violent storm that trapped these pits.

However, it is not as difficult as the storm in the multi-bone space, so there is always some communication between the continents, but it is still very small.

Of course, after the air disappeared, these storms also stopped.

After pom-poms came to this continent, you can see that it is a large desert environment.

These sands are not model sands, but the wreckage of various biological deaths after desertification. Lin carefully inspected and found that these sands were accumulated by the wreckage of a large number of different creatures.

They come from quite a variety of organisms, most of them are cell organisms, and some complete debris can be found in this sandy ground.